Agatec 510 GC Horizontal and Vertical Self Leveling Rotary Laser with Dual Manual Grade

AGATEC 11-0324 510GC Horizontal and Vertical Self Leveling Rotary Laser with Dual Manual Grade

The AGATEC 11-0324 510-GC Horizontal and Vertical Self Leveling Rotary Laser with Dual Manual Grade is the world's only interior laser with built-in wall mount and patented remote operation. The AGATEC 510-GC is the most fully featured laser that offers high performance at an affordable price. It is self leveling in both horizontal and vertical modes and is ideal for the general contractor needing to do leveling and aligning on the construction site. The AGATEC 510-GC features one touch leveling, just set the laser on the tripod and turn it on. The AGATEC 510-GC will level itself within its 5.7 degree self leveling range and then start rotating. The AGATEC 510-GC will even alert the user if it is moved out of position when the H.I. (height of instrument) alert is activated. The AGATEC 510-GC is accurate to 3/32" @100ft and has a working range of 1000ft in diameter providing complete jobsite coverage. Additionally, the patented brushless motor drives the rotor head, allowing the laser to operate up to an incredible 160 hours on two D-cell batteries, or up to 40 hours on the included rechargeable NiCad batteries. The AGATEC 510-GC features variable speed rotation modes of 90, 150, 300, 450, and 600RPM for varied light conditions, AND also includes the RCR500 combination 5-channel laser detector and remote control for use in the field with a level rod or in low light conditions. The AGATEC 510-GC is the only laser on the market that provides four beam operation modes, dot, scan, rotary and line. The AGATEC 510-GC scanning mode (laser chalk lines) creates laser lines from 2 degrees to 36 degrees allowing the user to use the instrument in confined areas or keep it from interfering with other lasers on the job site. The line mode is activated by flipping the level on the rotary head providing a long clear laser chalk line. The AGATEC 510-GC is capable of +/- 10% dual manual grade in the X and Y axis allowing for various grade matching applications with the option to have cross axis leveling in the X axis. The integrated wall and slope mount provides for additional grades between 0-90 degrees as well as providing the ability to line up over a point in vertical applications. The AGATEC 510-GC comes complete with the laser, alkaline battery tray, NiCad battery and charger, RCR500 detector and clamp, carrying case and owner's manual. 12 month warranty.

• 3/32"@100ft Accuracy provides optimal jobsite working range
• 1000ft diameter working range provides optimal jobsite coverage
• H.I. Alert informs user that the laser has moved from its initial position or when it has been disturbed
• Integrated vertical/wall mount allows user to position laser over reference points for alignment applications
• Manual Dual Grade up to 10% in both X and Y axis allows for grade matching applications on the jobsite