Agatec LT300 GC Split Beam Horizontal and Vertical All Metal Housing Rotary Laser Level with Dual Manual Grade

AGATEC 11-0054 LT300 GC Split Beam Horizontal and Vertical All Metal Housing Rotary Laser Level with Dual Manual Grade

The AGATEC 11-0054 LT300 GC Split Beam Horizontal and Vertical All Metal Housing Rotary Laser Level with Dual Manual Grade is one of the toughest, fully waterproof interior and exterior laser levels on the market. The durable all metal housing of the AGATEC LT300 GC was designed to provide the user with the most rugged and reliable laser for use on the roughest of jobsites. The AGATEC LT300 GC's rotary laser head is fully contained in a sealed nitrogen-filled glass housing that allows for optimal 360 degree coverage without blind spots. The AGATEC LT300 GC is fully self leveling and does not require the use of level screws or level vials to set it up. Just mount the laser on the tripod and press the power button. The laser will level itself within its wide leveling range (+/- 8%) then spin. Should the unit move out of its initial position, the H.I. (height of instrument) alert will shut the laser down eliminating bad elevation measurements in the field. The AGATEC LT300 GC has an accuracy of 1/8" @ 100ft with a working range of up to 1000ft in diameter with the included RCR500 combination laser detector and remote control. The user can also match slope with the AGATEC LT300 GC using the laser's manual mode to override self leveling, or in one axis with the security of cross axis leveling. Dual manual grades of up to 8% in X and Y are standard with the AGATEC LT300 GC. The AGATEC LT300GC is perfect for any outdoor grade checking application, but it is also capable of being used in machine control applications due to is 600RPM rotation speed. In addition, the AGATEC LT300 GC spins at 0, 90, 150, 300, and 450RPMs. The AGATEC LT300 GC may also be operated in the vertical mode where it is also self leveling. Just roughly level the laser with the trivet feet mounted on the side of the laser and the motors take over and level the instrument. The AGATEC LT300 GC features a split beam laser that will allow the user to complete alignment and squaring tasks on the jobsite. The user may also use the 2 degree to 35 degree scanning mode to work in areas where other lasers are being used so as not to interfere with other lasers on the job site. The rechargeable battery of the AGATEC LT300GC provides up to 40 hours of operation between charges. The AGATEC LT300 GC comes complete with the laser, RCR500 detector and clamp, battery charger, carrying case and user's manual. 12 month warranty.

• 1/8"@100ft Accuracy provides optimal jobsite working range
• 1000ft diameter working range provides optimal jobsite coverage
• H.I. Alert informs user that the laser has moved from its initial position or when it has been disturbed