Agatec MR360RA Rcvr w/ MD360R Disp 360 Degree Site Display Machine Control Receiver with MD360R Wireless Remote Cab Display

AGATEC 11-0348 MR360R 360 Degree Site Display Machine Control Receiver with MD360R Wireless Remote Cab Display

The AGATEC 11-0348 MR360R 360 Degree Site Display Machine Control Receiver with MD360R Wireless Remote Cab Display offers accurate grade control information for all visual machine control applications. The large 360 degree detection windows pick up any rotating laser from any angle. The MR360R's built in vertical indicator monitors angle of the excavator dipper stick, signaling if it is plumb or under or over extended. the MR360R receiver has a plumb LED indicator to indicate plumb. LED indicators show position of the cutting edge in relation to the laser reference beam. Seven display channels are provided to user in coarse mode while nine channels are provided in the fine mode allowing user to quickly and easily get on grade in coarse or fine modes. The MR360R's memory stores the last signal received and LED arrows will indicate which direction to move to get back in contact with laser reference beam. MR306R is mounted to the machine via rare earth magnets providing stability and accuracy when digging in rough terrain. The MR360R features full 360 degree coverage with a 9.75" capture window allowing user to have coverage virtaully everywhere on the job site within 650ft from the laser transimitter. The wireless MD360R provides the operator with an in-cab display of what is showing on the MR360R laser receiver. This allows the operator to continue working from the cab and eliminates teh need for co-workers to be in harm's way on the job site to check grade. The MR360R sensor and the MD360R display communication via radio communication so there are no cables running from the receiver to the display. The MD360R display is also clear so that the operator can see through the display eliminating viewing obstacles in the cab when using the display. MD360R mounts to machine cab via suction cup mount and is powered by machine's 12V source. System comes complete with receiver, magnetic mounts, battery charger, MD360R display, suction cup mount, power cord, case and owner's manual.

• 360 Degree pick up window ensures pick up coverage on any job site
• Extra strong rare earth magnets ensure that detector stays in place, even on the most rugged job sites
• 9.5 inch capture height provides wide field of view for laser beam pick up
• 5 degree plumb indicator ensures user of plumb of receiver when checking grade
• Wireless radio cab display allows user to see grade results from the cab of the machine providing quick response time to grade changes