|
Browse
|
MK-5000 Series Block Saws
MK-5000 Series Wet Cutting Block Saws
MK-5005S MK-5005T MK-5007T MK-5009T MK-5009G MK-5013G
MK-5000 Series Features: - Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
- Stay level blade guard cover gives 180º coverage at all times
- Open-back design allows for material up to 20" long to be cut
- Conveyor cart built from heavy-duty cast aluminum
- 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
- Adjustable water supply for maximum blade protection
- Built-in tie-downs for safer saw transport
- Ergonomically designed handle for reduced operator fatigue
- Spherical rod ends are used to maintain proper cutting head alignment
- Gas saw engine attachment is via four vibration isolation mounts
- Gas saws come with belt driven, self-priming centrifugal water pumps that can be disengaged for dry cutting
- Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
- One-year limited warranty
| Model | MK-5005S | MK-5005T | MK-5005T | | Motor | Baldor (Electric) | Baldor (Electric) | Baldor (Electric) | | Power | 5 HP 208/230V 1 Phase | 5 HP 208/230 3-Phase | 5 HP 460V 3-Phase | | Motor RPM | 1,725 | 1,725 | 1,725 | | Shaft RPM (14" Blade) | 2,700 | 2,700 | 2,700 | | Shaft RPM (20" Blade) | 1,925 | 1,925 | 1,925 | | L x W x H | 53" x 26" x 63" | 53" x 26" x 63" | 53" x 26" x 63" | | L x W x H (mm) | 1,346 x 660 x 1,600 | 1,346 x 660 x 1,600 | 1,346 x 660 x 1,600 | | Weight | 445 lbs. (202kg) | 451 lbs. (205kg) | 451 lbs. (205kg) | | Shipping Method | Truck | Truck | Truck | | Part # (14" Blade Guard) | 160634-14 | 160636-14 | 160637-14 | | Part # (20" Blade Guard) | 160634 | 160636 | 160637 |
|
| | Model | MK-5007T | MK-5007T | MK-5009T | | Motor | Baldor (Electric) | Baldor (Electric) | Baldor (Electric) | | Power | 7.5 HP 208/230 3-Phase | 7.5 HP 460V 3-Phase | 9 HP 208/230 3-Phase | | Motor RPM | 1,725 | 1,725 | 1,725 | | Shaft RPM (14" Blade) | 2,700 | 2,700 | 2,700 | | Shaft RPM (20" Blade) | 1,925 | 1,925 | 1,925 | | Shaft RPM (24" Blade) | 1,540 | 1,540 | 1,540 | | L x W x H | 53" x 26" x 63" | 53" x 26" x 63" | 53" x 26" x 63" | | L x W x H (mm) | 1,346 x 660 x 1,600 | 1,346 x 660 x 1,600 | 1,346 x 660 x 1,600 | | Weight | 485 lbs. (220kg) | 485 lbs. (220kg) | 503 lbs. (228kg) | | Shipping Method | Truck | Truck | Truck | | Part # (14" Blade Guard) | 160641-14 | 160642-14 | 160646-14 | | Part # (20" Blade Guard) | 160641 | 160642 | 160646 | | Part # (24" Blade Guard) | 160641-24 | 160642-24 | 160646-24 |
|
| | Model | MK-5009T | MK-5009G | MK-5013G | | Motor/Engine | Baldor (Electric) | Honda (Gas) | Honda (Gas) | | Power | 9 HP 460V 3-Phase | GX270 Cyclone | GX390 Cyclone | | Motor RPM | 1,725 | 3,600 | 3,600 | | Shaft RPM (14" Blade) | 2,700 | • | • | | Shaft RPM (20" Blade) | 1,925 | 1,851 | 1,851 | | Shaft RPM (24" Blade) | 1,540 | 1,653 | 1,653 | | L x W x H | 53" x 26" x 63" | 60" x 26" x 72" | 60" x 26" x 72" | | L x W x H (mm) | 1,346 x 660 x 1,600 | 1,524 x 660 x 1,826 | 1,524 x 660 x 1,826 | | Weight | 503 lbs. (228kg) | 498 lbs. (225kg) | 513 lbs. (233kg) | | Shipping Method | Truck | Truck | Truck | | Part # (14"Blade Guard) | 160647-14 | • | • | | Part # (20"Blade Guard) | 160647 | 158935 | 158936 | | Part # (24"Blade Guard) | 160647-24 | 158935-24 | 158936-24 |
|
| | General Specifications | | Arbor Size | 1" | | Depth of Cut with 14" Blade | 5" | | Depth of Cut with 20" Blade | 8" | | Depth of Cut with 24" Blade | 10" | | Length of Cut | 20" |
| | Motors available in other electrical configurations. |
|
| | Accessories Included with MK-5000 Series Saws | | Electric Water Pump (electric saws) | | Centrifugal Water Pump (gas saws) | | Rip Guide |
|
Stay level blade guard gives 180º coverage at all times.
Open-back design allows 8" high block to be cut in a single pass.
All 3 phase saws are equipped with GE NEMA 1 starters with NEMA 4 enclosure. Both the housing and the starter meet or exceed NEMA Standards ICS 2-1988. The power cord is a minimum length of 6 feet and comes ready for panel wiring. Additional power cord length is available upon request.
The MK-5000 conveyor cart is built from heavy-duty cast aluminum. A skid-resistant rubber top is permanently bonded to the table top for wear resistance. Water-flow control vents channel water during cutting operations to the water pan. Nylon conveyor cart wheels have permanently sealed bearings.
Gas saw cutting heads are designed to keep the rotation of the motor within the manufacturer's requirement of degrees of motion.
Heavy-duty built-in forklift brackets allow lift to approach from front, back, or either side.
Featured Products
-
Rockwell RK5101K
- SoniCrafter, 37pc Variable Speed Professional kit
- Our Price: $162.41
- Collection
-
-
Ridgid 31123
- SeeSnake Micro Inspection Camera with 9.5mm Camera Head
- Our Price: $251.81
- You Save 12%
- SeeSnake Micro Collection
-
Products you will find in this category are: MK-5005S, MK-5005T, MK-5007T, MK-5009T, MK-5009G, MK-5013G
Reasons To Shop at ToolsDirect.com
-
400,000+ products shipped - Over 50 warehouses, 30 vendors, 20+ direct-manufacturer relationships - Top 30 Fastest Growing Retailer
-
Read how we do more to protect your information and transactions.
-
We will beat any competitors' price by 10% of the difference. Learn More...
-
Orders over $199 automatically receive Free Shipping!*
-
Improvement Direct Preferred Account makes it quick, easy and secure to shop for thousands of home improvement products and earn great benefits.
-
ToolsDirect.com is a Network Store of Improvement Direct. When shopping with ToolsDirect.com, you have access to ALL of our stores. One account - everything home improvement and decor!
|
|
Featured Masonry Saws
-
-
-
-
MK Diamond PX-3
- PX-3 14 Inch Dry Cutting Masonry Saw
- Our Price: $513.63
- You Save 12%
-
-
-
-
MK Diamond BX-4
- 1-3/4 HP, 14" Wet/Dry Cutting Masonry Saw
- Our Price: $946.75
- You Save 13%
-
-
|
Yamaha EF4000DE
Malco FDC2
Malco M2007
Rolatape 300M
Little Giant 14940175
Milwaukee 48-30-1520
Wheeler-Rex 602
